Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager with best price

Sale!
Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager
Fluke Ti50FT-10/20 Thermal Imager
Fluke Ti50FT-10/20 Thermal

Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager with best price

Original price was: $8,900.Current price is: $6,750.

Category: Tag:

Description

Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager with best priceLarge, sharp thermal images Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.

A sharp image in every situation The innovative 180° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.

Characteristics: Fluke TI50FT-10-20 Thermal Imager Camera FlexCam
High resolution, low noise VOx detector for high quality images
Temperature range to cover broad industrial applications
High thermal sensitivity for viewing even the smallest temperature differences
180º articulating flexible lens to view images in every situation
Large 5″ high contrast color LCD for a clear picture independent of lighting conditions
Fully radiometric for detailed temperature analysis and tracking
SmartFocus for best image quality and accurate temperature measurements
Windows CE based menu structure for ease of use
Personalized instrument set-up for multiple use
CompactFlash memory cards to store over 1000 IR images plus fully radiometric temperature data
SmartView reporting and analysis software included
Built-in visible light (digital) camera
Laser pointer for easy targeting
Flash and torch light for high quality images in dark environments

 

Applications: Fluke TI50FT-10-20 Thermal Imager Camera FlexCam
Troubleshooting Pinpointing the location of specific problems in equipment and systems
Preventive/predictive maintenance Identify electrical and mechanical problems before they cause failure
Industrial maintenance Check whether repairs have been performed correctly
Process monitoring Real-time observation to ensure efficient and safe operations
Electronic design Close up circuit board analysis
Quality control Examine prototypes and refine thermal management designs
Research and development Quantify heat patterns to improve product designs

 

Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager Specifications: Fluke TI50FT-10-20 Thermal Imager Camera FlexCam
Imaging Performance
Field of view (FOV)* 23° horizontal x 17° vertical
Spatial resolution (IFOV)* 1.30 mrad
Min focus distance* 0.15 m (5.9 in)
Thermal Sensitivity (NETD) ≤ 0.07 °C at 30 °C (70 mK)
Frequency 60 Hz
Focus SmartFocus; one finger continuous focus (manual)
Zoom 2x
Resolution 320 x 240 Focal Plane Array, Vanadium Oxide (VOx) Uncooled Microbolometer
Spectral band 8 μm to 14 μm
Digital image enhancement Automatic full time enhanced
On camera operating modes Full thermal, full visual light or merged thermal-visual images.
Picture-In-Picture Yes
Fusion Yes
Visible light camera 1280 x 1024 pixels, full color
Visible light digital zoom 2x
*Standard 20 mm Germanium lens
Temperature measurement
Temperature Range -20 °C to 350 °C (-4 °F to 662 °F) in two ranges
Range one = -20 °C to 100 °C (-4 °F to 212 °F)
Range two = -20 °C to 350 °C (32 °F to 662 °F)
Accuracy ± 2 °C or 2 % (whichever is greater)
Measurement modes Centerpoint, center box
(area min/max, average)
Emissivity correction 0.1 to 1.0 (0.01 increments)
Image presentation 
Digital display 13 cm (5 in) diagonal large high-resolution digital display
LCD backlight Sunlight readable color LCD
Video output RS170 EIA/NTSC or CCIR/PAL composite video
Palettes Grayscale, grayscale inverted, blue red, high contrast, hot metal,
ironbow, amber, amber inverted
Optical lenses
10.5 mm wide angle lens Field of view (FOV): 42° horizontal x 32° vertical
Spatial resolution (IFOV): 2.45 mrad
Min focus distance: 0.3 m (0.98 ft)
Image and data storage
Storage medium Compact flash card stores over 1000 IR images (1 GB card standard)
File formats supported 14 bit measurement data included. Exportable Images: bmp, gif, jpg, png, tiff;
Data formats: comma separated (csv), tab separated (txt).
Interface and software
Interface Compact flash card reader included
Software SmartView; Full analysis and reporting software included
Laser
Classification Class II
Laser targeting Laser dot visible on screen when blending thermal and visible image
Controls and adjustments
Set-up controls Date/time, temperature units C/F, language, scale, LCD intensity (high/normal/low)
Image controls Level, span, auto adjust (continuous/manual)
On-screen indicators Battery status, target emissivity, background temperature and realtime clock
Power
Battery type Li-Ion smart battery, rechargeable, field-replaceable (two included)
Battery operating time Two hours continuous operation (per battery)
Battery charging Two bay intelligent charger powered via ac outlet
Power saving Automatic shutdown and sleep modes (user specified)
Environmental and mechanical design
Operating temperature -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature -40 °C to +70 °C (-40 °F to 158 °F)
Relative humidity Operating and storage 10 % to 95 %, non-condensing
Water and dust resistant IP54
Weight (including batteries) 1.95 kg (4.3 lb)
Camera size (H x W x D) 162 mm x 262 mm x 101 mm (6.5 in x 10.5 in x 4.0 in)
Other 
Warranty Two-years

Reviews

There are no reviews yet.

Be the first to review “Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager with best price”

Your email address will not be published. Required fields are marked *

Related products